MMM 8T 120M

It is designed to meet the needs of medium-sized farms that want to produce feed in-house.

The MMM8T-120M mill mixer consists of a mill equipped with 120 hammers for processing grain. The mill hopper is fitted with magnets to remove any ferrous materials from the grain.

The mill is also equipped with a vacuum fan and a dust cyclone, which significantly reduce dust generated during the grinding process.

Once ground, the grain is transferred via an auger to the mixing tank, which has a capacity of 13.5 m³ and is equipped with two augers featuring two homogenizing knives to ensure thorough mixing of the grain.

After mixing, the material is discharged into silos via a 200 mm diameter auger that is 6.9 meters long, allowing storage in silos up to 8.5 meters high.

The MMM8T-120M mill mixer is supplied with the following equipment:

• 120-hammer mill
• 13.5 m³ mixing tank
• Rear auger for adding additives
• Weighing system
• Outlets for sampling
• Unloading auger Ø 200 with length 6.9m
• Hydraulic opening above mixing tank for adding additive with telescoping
• Dual-axle agricultural chassis with oil brakes

In addition to the standard equipment, the MMM8T-120M can be supplied with the following accessories:

• 172-hammer mill
• Loading hopper for telescopic
• Hydraulic cover for mill hopper
• Rear hopper for adding additives with big bag or telescopic
• Discharge auger with a length of 8.9 m
• Oversize discharge auger (Ø250–220 mm) for higher discharge capacity