The Bio 1250 Bio-Shredder is part of our medium-high quality range of products. The rotor comes with reversable moving hammers which last 150-200 hours, depending on the type of material to shred. The feel belt is 1250 mm wide and 3500 mm long with a shutter-type structure and high sides.
VERSION AVAILABLE:
• FOR TRACTOR: reccomended HP: 120/180
• WITH TURBO DIESEL ENGINE: installed HP: 235/302 HP
The silenced diesel engine is housed under a sound-proof bonnet designed for continuous use with a “NO STRESS” clutch. The Bio 1250 is deal for shredding SAWN-OFF BRANCHES, GRASS, LEAVES, WOODEN AND CARDBOARD PACKING CASES, WASTE FRUIT AND VEGETABLES, WOODEN BOXES, PALLETS, etc. Output ranges from 60 to 90 mc3/h depending on the type of material shredded. The control position is such that the operator has a constant view of the whole working area. The flow of material is controlled by an ELECTRONIC BELT SPEED CONTROL DEVICE synchronized with the SHREDDING ROTOR rotation speed.
This shredding system using mobile hammers is unique in that the size of the shredded materila can be adjustes using counter-hammers.
The Bio- Shredder model Bio 930 represents the medium-high range of Caravaggi production. The machine is provided with a rotor of 22 mobile and reversible hammers, which last of 200-350 hours depends on the kind of material to shred. The conveyor belt is 130 mm wide and 2500 long with a shutter-type structure and high sides. The Bio 930 is available in diesel, electric engine and tractor power takeoff. The diesel engine is mounted under a bonnet, which is designed for continuous use with a “no-stress system” clutch. The Bio 930 has been created for shredding sawn-off branches, grass, leaves, trunks, wooden and cardboard packing cases as pallets, etc. The output production is about 30/60 m3/h depending on the type of material shredded. The material’s flowing is controlled by an electronic belt speed control device interconnected with the shredding rotor rotation speed.
The Bio- Shredder model Bio 930 represents the medium-high range of Caravaggi production. The machine is provided with a rotor of 22 mobile and reversible hammers, which last of 200-350 hours depends on the kind of material to shred. The conveyor belt is 130 mm wide and 2500 long with a shutter-type structure and high sides. The Bio 930 is available in diesel, electric engine and tractor power takeoff. The diesel engine is mounted under a bonnet, which is designed for continuous use with a “no-stress system” clutch. The Bio 930 has been created for shredding sawn-off branches, grass, leaves, trunks, wooden and cardboard packing cases as pallets, etc. The output production is about 30/60 m3/h depending on the type of material shredded. The material’s flowing is controlled by an electronic belt speed control device interconnected with the shredding rotor rotation speed.
The Bio 1250 Bio-Shredder is part of our medium-high quality range of products. The rotor comes with reversable moving hammers which last 150-200 hours, depending on the type of material to shred. The feel belt is 1250 mm wide and 3500 mm long with a shutter-type structure and high sides.
VERSION AVAILABLE:
• FOR TRACTOR: reccomended HP: 120/180
• WITH TURBO DIESEL ENGINE: installed HP: 235/302 HP
The silenced diesel engine is housed under a sound-proof bonnet designed for continuous use with a “NO STRESS” clutch. The Bio 1250 is deal for shredding SAWN-OFF BRANCHES, GRASS, LEAVES, WOODEN AND CARDBOARD PACKING CASES, WASTE FRUIT AND VEGETABLES, WOODEN BOXES, PALLETS, etc. Output ranges from 60 to 90 mc3/h depending on the type of material shredded. The control position is such that the operator has a constant view of the whole working area. The flow of material is controlled by an ELECTRONIC BELT SPEED CONTROL DEVICE synchronized with the SHREDDING ROTOR rotation speed.
This shredding system using mobile hammers is unique in that the size of the shredded materila can be adjustes using counter-hammers.
The Bio-Shredder and chipper Bio 600 combines both a hammer mill and disc blade chipper in one. The fineness of the finished product can be altered with the use of different size screens. A rubber belt conveyor can be fitted as an option to discharge the material even with a high moisture content. The lateral chipper is in a separate chamber from the hammer mill. This allows large logs to be fed through the chipper that cannot be fed directly through the mill. All high branches, leaves etc, can be put directly into the mill. The machines is capable of handling many organic materials including wood bark, scrob wood, greenery, flowers manure etc. The machine can be fitted with several options for use by contractors or public authorities ie road axle and towing hitch and sound insulation. The machine is of simple robust construction this allowing easy care and maintenance.
Accessoires:
- High speed chassis – 80 km/h
- Discharge conveyor mt 2,70
This extraordinary model TPF straw chopper cuts up loose straw and bales in a flash to exactly the right size and roducing virtually no dust! The TPF straw chopper gives you bedding to suit your needs, ranging from one to 10 centimetres in length. All you have to do is mount the right size screen to suit your requirements. This versatile chopper grinds any kind of loose or pressed straw, and hay. It works so quickly and cleanly you will soon find you cannot do without it! Low purchase price and top performance make the model TPF STRAW CHOPPER an exceptionally profitable investment. It takes a minute to chop up a bale of straw for bedding. You can process 50-60 bales an hour.
This extraordinary model TPF straw chopper cuts up loose straw and bales in a flash to exactly the right size and roducing virtually no dust! The TPF straw chopper gives you bedding to suit your needs, ranging from one to 10 centimetres in length. All you have to do is mount the right size screen to suit your requirements. This versatile chopper grinds any kind of loose or pressed straw, and hay. It works so quickly and cleanly you will soon find you cannot do without it! Low purchase price and top performance make the model TPF STRAW CHOPPER an exceptionally profitable investment. It takes less than a minute to chop up a bale of straw for bedding. You can process 100-120 bales an hour.
This extraordinary model TPF straw chopper cuts up loose straw and bales in a flash to exactly the right size and roducing virtually no dust! The TPF straw chopper gives you bedding to suit your needs, ranging from one to 10 centimetres in length. All you have to do is mount the right size screen to suit your requirements. This versatile chopper grinds any kind of loose or pressed straw, and hay. It works so quickly and cleanly you will soon find you cannot do without it! Low purchase price and top performance make the model TPF STRAW CHOPPER an exceptionally profitable investment. It takes less than a minute to chop up a bale of straw for bedding. You can process 100-120 bales an hour.
The Bio- Shredder model Bio 930 represents the medium-high range of Caravaggi production. The machine is provided with a rotor of 22 mobile and reversible hammers, which last of 200-350 hours depends on the kind of material to shred. The conveyor belt is 130 mm wide and 2500 long with a shutter-type structure and high sides. The Bio 930 is available in diesel, electric engine and tractor power takeoff. The diesel engine is mounted under a bonnet, which is designed for continuous use with a “no-stress system” clutch. The Bio 930 has been created for shredding sawn-off branches, grass, leaves, trunks, wooden and cardboard packing cases as pallets, etc. The output production is about 30/60 m3/h depending on the type of material shredded. The material’s flowing is controlled by an electronic belt speed control device interconnected with the shredding rotor rotation speed.
To meet the needs of small and large farms alike, while ensuring high performance with all types of material handled, ranging from fresh or dry cereals to corn-cobs, hay and straw .
To meet the needs of small and large farms alike, while ensuring high performance with all types of material handled, ranging from fresh or dry cereals to corn-cobs, hay and straw .
This extraordinary model TPF straw chopper cuts up loose straw and bales in a flash to exactly the right size and roducing virtually no dust! The TPF straw chopper gives you bedding to suit your needs, ranging from one to 10 centimetres in length. All you have to do is mount the right size screen to suit your requirements. This versatile chopper grinds any kind of loose or pressed straw, and hay. It works so quickly and cleanly you will soon find you cannot do without it! Low purchase price and top performance make the model TPF STRAW CHOPPER an exceptionally profitable investment. It takes a minute to chop up a bale of straw for bedding. You can process 50-60 bales an hour.
The new Bio-Shredder TRX50 – TRX50S, proposed to widen the domestic range, is aimed to the shredding of green waste material of 6cm diameter max,thanks to the rotor composed of 2 re-sharpened steel blades and 1 counterblade, that facilitate the shredding at a minimum effort of the engine. The 4 shovels help the discharge of the material, through an output pipe of 1 mt adjustable 270°. So, a more performing machine of high capacity.
TRX is proposed in these versions:
Direct transmission with electric engine and petrol engine HONDA GP160
Belt transmission with petrol engines HONDA GX160 and HONDA GX200.
It complies with the CE regulations at work.
Completely MADE IN ITALY.
The new Bio-Shredder TRX50 – TRX50S, proposed to widen the domestic range,
is aimed to the shredding of green waste material of 6cm diameter max , thanks
to the rotor composed of 2 re-sharpened steel blades and 1 counterblade, that facilitate the shredding at a minimum effort of the engine.
The 4 shovels help the discharge of the material, through an output pipe of 1 mt adjustable 270°.
So, a more performing machine of high capacity.
TRX is proposed in these versions:
Direct transmission with electric engine and petrol engine HONDA GP160
Belt transmission with petrol engines HONDA GX160 and HONDA GX200.
It complies with the CE regulations at work.
Completely MADE IN ITALY.
Bio 350 for tractor 540 DEMO
- Blower up to 2 mts
- Agricultural chassis and drawbar
- Electronic control “No Stress”
Euro 9.200,00 + IVA
Vaglio 3000 Diesel Lombardini 63HP
Posted
- HIGH SPEED CHASSIS 80 KM/H
- REMOTE CONTROL
- REAR DISCHARGE CONVEYOR 500X80 CM
- LATERAL DISCHARGE CONVEYOR 500X80 CM
- SCREEN 25X25 MM
Contenuto non disponibile - Content not available. - Contenu non disponible Consenti i cookie cliccando su "Accetto" nel banner - Please allow cookies by clicking Accept on the banner. - Autoriser les cookies en cliquant sur "J'accepte" dans la bannière
Salonvert – 20-21 September 2017 – Base de loisirs – Vénérieu
Posted
We will be present from 20 at 21 September 2017 a
Salonvert 2017 - Base de loisirs – Vénérieu (38) près de Lyon http://www.salonvert.com
Stump Grinder MTC
Posted
– For all types of two-wheels tractor
– Milling disc diameter 355 mm
– Milling disc thickness 12 mm
– Surface cutting 230 mm
– Underground cutting 230 mm
– Stump diameter – Without limits
Salon International de l’Agriculture au Maroc 18/23 April 2017
Posted
From 18 to April 23, 2017 we will be at:
Bio 235
Posted
BIO 235 diesel with steel loading conveyor and leveled tracks.
Vaglio 5000 video
Posted
Screening machine used on worksite, for composting, and in new emerging sectors for recovering and recycling wastes. Provided with a screening system with a rotary drum (screen change system for different requests), the loading system comes by means of a large worm screw which breaks up the material before it enters the drum; the thinner material drops onto the conveyor belts and discharged laterally; the rejects are instead removed by the rear belt.
Screening machine used on worksite, for composting, and in new emerging sectors for recovering and recycling wastes. Provided with a screening system with a rotary drum (screen change system for different requests), the loading system comes by means of a large worm screw which breaks up the material before it enters the drum; the thinner material drops onto the conveyor belts and discharged laterally; the rejects are instead removed by the rear belt.
The Bio 1250 Bio-Shredder is part of our medium-high quality range of products. The rotor comes with reversable moving hammers which last 150-200 hours, depending on the type of material to shred. The feel belt is 1250 mm wide and 3500 mm long with a shutter-type structure and high sides.
VERSION AVAILABLE:
• FOR TRACTOR: reccomended HP: 120/180
• WITH TURBO DIESEL ENGINE: installed HP: 235/302 HP
The silenced diesel engine is housed under a sound-proof bonnet designed for continuous use with a “NO STRESS” clutch. The Bio 1250 is deal for shredding SAWN-OFF BRANCHES, GRASS, LEAVES, WOODEN AND CARDBOARD PACKING CASES, WASTE FRUIT AND VEGETABLES, WOODEN BOXES, PALLETS, etc. Output ranges from 60 to 90 mc3/h depending on the type of material shredded. The control position is such that the operator has a constant view of the whole working area. The flow of material is controlled by an ELECTRONIC BELT SPEED CONTROL DEVICE synchronized with the SHREDDING ROTOR rotation speed.
This shredding system using mobile hammers is unique in that the size of the shredded materila can be adjustes using counter-hammers.
Aspirafoglie Jumbo
Benzina B&S 18 cv
Con carrello 4 ruote
Price € 2.900,00 + iva
Cippo 15 Benzina Honda GX 690
Posted
Cippo 15 Benzina Honda GX 690
Carrello stradale 80 km/h immatricolato
Controllo elettronico no stress
Price € 11.000,00 + iva
Bio 250 per Trattore 540 giri
Posted
Bio 250 per Trattore 540 giri
Price € 2.800,00 + iva
Progetto Fuoco – 24/28 february 2016 – Verona
Posted
We will be present from 24 at 28 february 2016 in Verona
External Area
Hammermill-video
Posted
To meet the needs of small and large farms alike, while ensuring high performance with all types of material handled, ranging from fresh or dry cereals to corn-cobs, hay and straw .
International exhibition of plants and materials for wood-fired heating External Area
BIO 1900
Posted
Il biotrituratore BIO 1900 è la macchina più imponente disponibile nel mercato avendo dimensioni progettate per accogliere i rifiuti organici e vegetali mediante caricamento da pale meccaniche e benne a polipo. Il sistema di caricamento è automatizzato e servo-assistito, le sicurezze attive e passive ne assicurano il funzionamento nella massima sicurezza con un solo operatore a bordo del caricatore. La macchina è dotata di rulli supplementari di preparazione del rifiuto, prefrantumatori, la triturazione con sfibratura è calibrata dalla griglia di post frantumazione a riciclo del materiale che non ha raggiunto la giusta pezzatura. L’innovativa catenaria, con regolazione della velocità e volume di carico, è dotata del sistema unico nel suo genere per la pulizia in continuo, il sistema garantisce che si possano triturare anche materiale fibroso e filamentoso. Lo scarico del materiale avviene mediante un nastro di scarico coperto totalmente, regolabile idraulicamente, predisposto per il montaggio del magnete per i metalli ferrosi. Il motore endotermico è alloggiato in un vano facilmente accessibile per la manutenzione, la copertura fonoassorbente ignifuga lo protegge e lo mantiene protetto e preservato da agenti esterni sia termici che meccanici durante le fasi di lavoro. La dotazione di serie prevede la frizione idraulica automatica centrifuga “Soft-starter” con controllo “Anti-shock” per proteggere gli apparati meccanici dall’intrusione costante di materiale non controllabile dall’operatore. Il trituratore è controllato con il sistema elettronico “No-stress” con PLC programmato per le varie esigenze operative. Ottimale per la riduzione volumetrica dei rifiuti da destinare al recupero come biomassa, imballaggi, etc. La disponibilità di vari modelli di carrello stradale, lo rende agibile ed utilizzabile in ogni cantiere di lavoro.
Il cippatore CIPPO 1900 ha caratteristiche dimensionali adatte a ricevere ogni tipo di legno da trasformare in cippato. Il tamburo e’ l’unico ad adottare lame sezionate, facilmente regolabili e affilabili. L’unicità della grande tramoggia di carico con nastro di autoalimentazione permette che il legno venga gettato senza alcuna necessità di particolare adattamento ai rulli alimentatori. La griglia in dotazione, con foro a scelta, calibra il cippato. Tutto il materiale trattato viene recuperato tramite coclea a vite senza fine, garantendo la perfetta pulizia. Il nastro di scarico coperto regolabile, e’ predisposto per il magnete ed è studiato per non sfarinare il cippato evitando che parte del legno venga perso durante la combustione. La dotazione di serie prevede il telecomando, l’insonorizzazione del motore endotermico, oltre la gestione elettronica No-stress le sicurezze passive Anti-stress e Anti-shok, il carrello da cantiere, predisposizone del ponte cingolato per la movimentazione in aree accidentate. L’innovativo sistema “multirullo” alimentatore e dosatore con denti a ritegno, stabilizza il legno in ingresso in modo orizzontale assicurando la perfetta qualità del materiale.
Il trituratore industriale modello TRITO 1900 è progettato per i grandi lavori di riduzione volumetrica di ogni tipo di rifiuto. La rivoluzionaria soluzione ad utensili flottanti intercambiabili con sistema a denti e contropettine auto pulente, rende il trituratore un riduttore volumetrico di ineguagliabili caratteristiche funzionali ed assicura la costante operatività “NON FERMANDOSI MAI”, neppure processando il rifiuto “fibroso e filamentoso” tanto temuto dalla concorrenza. La macchina è dotata di serie di ogni accessorio che la rende sicura: sicurezze attive e passive, telecomando, metal detector, oltre la disponibilità a personalizzare la versione alle varie esigenze impiantistiche per l’alloggiamento fisso con telecamera. I rulli prerompitori aprì sacco dosano e facilitano il processo di trattamento, la pezzatura e’ regolabile. L’assistenza ordinaria, l’accesso agli organi meccanici di trasmissione e alle parti di usura, sono semplici e sicuri. La dotazione di serie ed il corso di formazione per gli operatori sono la garanzia per il continuo e perfetto funzionamento.
The Bio/Shredder type Bio 150 it can be supplied with petrol or electric engine. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow etc.; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a sieve by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The BIO 190 is a NEW GENERATION BIO-SHREDDER combining different systems used in shredding organic and vegetable waste, with a single feed opening, a double chipping and shredding system with grid refining and subsequent ventilation at 200 cm from the floor. The machine comes with engine or motor or tractor power takeoff. The BIO/Shredder type Bio 190 can be supplied with petrol or electric engine. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow etc; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a sieve by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The Chipper Mixer is a machine used for crushing and mixing of different products, for use in the field of composting and volume reduction. The process provides for the shredding of the material and the simultaneous mixing of the same, thus allowing to obtain a homogeneous product. The slow rotation of the blades, it also allows a reduction of the noise, dust and eliminates the projection of machining chips.
The Bio 1250 Bio-Shredder is part of our medium-high quality range of products. The rotor comes with reversable moving hammers which last 150-200 hours, depending on the type of material to shred. The feel belt is 1250 mm wide and 3500 mm long with a shutter-type structure and high sides.
VERSION AVAILABLE:
• FOR TRACTOR: reccomended HP: 120/180
• WITH TURBO DIESEL ENGINE: installed HP: 235/302 HP
The silenced diesel engine is housed under a sound-proof bonnet designed for continuous use with a “NO STRESS” clutch. The Bio 1250 is deal for shredding SAWN-OFF BRANCHES, GRASS, LEAVES, WOODEN AND CARDBOARD PACKING CASES, WASTE FRUIT AND VEGETABLES, WOODEN BOXES, PALLETS, etc. Output ranges from 60 to 90 mc3/h depending on the type of material shredded. The control position is such that the operator has a constant view of the whole working area. The flow of material is controlled by an ELECTRONIC BELT SPEED CONTROL DEVICE synchronized with the SHREDDING ROTOR rotation speed.
This shredding system using mobile hammers is unique in that the size of the shredded materila can be adjustes using counter-hammers.
Il biotrituratore BIO 1900 è la macchina più imponente disponibile nel mercato avendo dimensioni progettate per accogliere i rifiuti organici e vegetali mediante caricamento da pale meccaniche e benne a polipo. Il sistema di caricamento è automatizzato e servo-assistito, le sicurezze attive e passive ne assicurano il funzionamento nella massima sicurezza con un solo operatore a bordo del caricatore. La macchina è dotata di rulli supplementari di preparazione del rifiuto, prefrantumatori, la triturazione con sfibratura è calibrata dalla griglia di post frantumazione a riciclo del materiale che non ha raggiunto la giusta pezzatura. L’innovativa catenaria, con regolazione della velocità e volume di carico, è dotata del sistema unico nel suo genere per la pulizia in continuo, il sistema garantisce che si possano triturare anche materiale fibroso e filamentoso. Lo scarico del materiale avviene mediante un nastro di scarico coperto totalmente, regolabile idraulicamente, predisposto per il montaggio del magnete per i metalli ferrosi. Il motore endotermico è alloggiato in un vano facilmente accessibile per la manutenzione, la copertura fonoassorbente ignifuga lo protegge e lo mantiene protetto e preservato da agenti esterni sia termici che meccanici durante le fasi di lavoro. La dotazione di serie prevede la frizione idraulica automatica centrifuga “Soft-starter” con controllo “Anti-shock” per proteggere gli apparati meccanici dall’intrusione costante di materiale non controllabile dall’operatore. Il trituratore è controllato con il sistema elettronico “No-stress” con PLC programmato per le varie esigenze operative. Ottimale per la riduzione volumetrica dei rifiuti da destinare al recupero come biomassa, imballaggi, etc. La disponibilità di vari modelli di carrello stradale, lo rende agibile ed utilizzabile in ogni cantiere di lavoro.
Il cippatore CIPPO 1900 ha caratteristiche dimensionali adatte a ricevere ogni tipo di legno da trasformare in cippato. Il tamburo e’ l’unico ad adottare lame sezionate, facilmente regolabili e affilabili. L’unicità della grande tramoggia di carico con nastro di autoalimentazione permette che il legno venga gettato senza alcuna necessità di particolare adattamento ai rulli alimentatori. La griglia in dotazione, con foro a scelta, calibra il cippato. Tutto il materiale trattato viene recuperato tramite coclea a vite senza fine, garantendo la perfetta pulizia. Il nastro di scarico coperto regolabile, e’ predisposto per il magnete ed è studiato per non sfarinare il cippato evitando che parte del legno venga perso durante la combustione. La dotazione di serie prevede il telecomando, l’insonorizzazione del motore endotermico, oltre la gestione elettronica No-stress le sicurezze passive Anti-stress e Anti-shok, il carrello da cantiere, predisposizone del ponte cingolato per la movimentazione in aree accidentate. L’innovativo sistema “multirullo” alimentatore e dosatore con denti a ritegno, stabilizza il legno in ingresso in modo orizzontale assicurando la perfetta qualità del materiale.
Il trituratore industriale modello TRITO 1900 è progettato per i grandi lavori di riduzione volumetrica di ogni tipo di rifiuto. La rivoluzionaria soluzione ad utensili flottanti intercambiabili con sistema a denti e contropettine auto pulente, rende il trituratore un riduttore volumetrico di ineguagliabili caratteristiche funzionali ed assicura la costante operatività “NON FERMANDOSI MAI”, neppure processando il rifiuto “fibroso e filamentoso” tanto temuto dalla concorrenza. La macchina è dotata di serie di ogni accessorio che la rende sicura: sicurezze attive e passive, telecomando, metal detector, oltre la disponibilità a personalizzare la versione alle varie esigenze impiantistiche per l’alloggiamento fisso con telecamera. I rulli prerompitori aprì sacco dosano e facilitano il processo di trattamento, la pezzatura e’ regolabile. L’assistenza ordinaria, l’accesso agli organi meccanici di trasmissione e alle parti di usura, sono semplici e sicuri. La dotazione di serie ed il corso di formazione per gli operatori sono la garanzia per il continuo e perfetto funzionamento.
The Bio- Shredder model Bio 930 represents the medium-high range of Caravaggi production. The machine is provided with a rotor of 22 mobile and reversible hammers, which last of 200-350 hours depends on the kind of material to shred. The conveyor belt is 130 mm wide and 2500 long with a shutter-type structure and high sides. The Bio 930 is available in diesel, electric engine and tractor power takeoff. The diesel engine is mounted under a bonnet, which is designed for continuous use with a “no-stress system” clutch. The Bio 930 has been created for shredding sawn-off branches, grass, leaves, trunks, wooden and cardboard packing cases as pallets, etc. The output production is about 30/60 m3/h depending on the type of material shredded. The material’s flowing is controlled by an electronic belt speed control device interconnected with the shredding rotor rotation speed.
Screening machine used on worksite, for composting, and in new emerging sectors for recovering and recycling wastes. Provided with a screening system with a rotary drum (screen change system for different requests), the loading system comes by means of a large worm screw which breaks up the material before it enters the drum; the thinner material drops onto the conveyor belts and discharged laterally; the rejects are instead removed by the rear belt.
Composting is exothermic process of biological oxidation of organic substances by aerobic micro-organism, present in a sufficient quantity, on an organic biomass substrate rich in nutrients, that supplies oxygen and it keeps a constant PH factor and an appropriate nebulization. The working speed and the optimal aeration allowed by the turner are its main features.
The TRITO is a multi-purpose shredder ideal for recycling garbage disposal of any type such as paper, cardboard even of thickness, plastic bottles and boxes, fiberglass bumpers, carpentry scraps, pharmaceutical and hospital wastes. Thanks to the wide range and to the different types of blades it is able to satisfy the several and various requirements. The production of the chipped material varies according to the type of the pieces to be shredded and the size to be obtained. It is equipped with a safety system consisting in a rotation and reverse application in case of overloading. A versatile machine, ideal for different kinds of wastes, the TRITO is at low energy consumption and at low noise; so particularly fitted to small and medium companies.
The vacuum JUMBO is a high powered professional machine for harvesting grass and leaves. It is used by operators for cleaning areas where it is not possible to enter or pass with a vehicle. The Jumbo can be hooked on the lorry’ s side boards and due to a flexible tube, with a diameter of 200mm, the material can be discharged directly in the trailer. The vacuum JUMBO has a flexible tube of 200mm diameter and 6 mts length, a supporting arm, rotating at 180°, and an adjustable and turnable discharge conveyor that allows the discharge of the blowered material to the wished place.
The vacuum JUMBO is a high powered professional machine for harvesting grass and leaves. It is used by operators for cleaning areas where it is not possible to enter or pass with a vehicle. The Jumbo can be hooked on the lorry’ s side boards and due to a flexible tube, with a diameter of 200mm, the material can be discharged directly in the trailer. The vacuum JUMBO has a flexible tube of 200mm diameter and 6 mts length, a supporting arm, rotating at 180°, and an adjustable and turnable discharge conveyor that allows the discharge of the blowered material to the wished place.
- Honda engine from 9 to 13 HP
- Kohler engine from 12 HP
- Light machine and easy to use (weight ~ 150 Kg)
- Cutter wheel with 8 carbide tools, easy to replace
- Control handle bar adjustable
- Machine ideal for professional use
- Kohler engine from 20 to 25 HP
- Hydrostatic transmission for move and control easy
- Electric clutch
- Light machine and easy to use (weight 227÷236 Kg)
- Cutter wheel with 8 carbide tools, easy to replace
- Control handle bar adjustable
- Special air filter for hard use of the machine
- Machine ideal for professional use
- Kohler engine 27 or B&S Vanguard 31 HP
- Solid machine and practice to use
- Hydrostatic transmission for move and control easy
- Front wheels adjustables in width up to 120 cm
- Width in transport to 75 cm
- Telescopic cutter wheel adjustable in length up to 60 cm
- Cutter tools “Heavy Duty” easy to replace
- Start panel with safety switch
- Central position of controls lever
- Stabilization hydraulic plate
- Weight from 680 to 690 Kg
- Macchine made with advanced technology for professional use
This extraordinary model TPF straw chopper cuts up loose straw and bales in a flash to exactly the right size and roducing virtually no dust! The TPF straw chopper gives you bedding to suit your needs, ranging from one to 10 centimetres in length. All you have to do is mount the right size screen to suit your requirements. This versatile chopper grinds any kind of loose or pressed straw, and hay. It works so quickly and cleanly you will soon find you cannot do without it! Low purchase price and top performance make the model TPF STRAW CHOPPER an exceptionally profitable investment. It takes a minute to chop up a bale of straw for bedding. You can process 50-60 bales an hour.
The CIPPO 15 chipping machine is designed for use by forestry, tree felling,and garden maintenance companies and the producers of chips for heating system. The extra large feed hopper is comprised of a two-hydraulic roller feed system with independent motors that regulate the flow of material, which can be up to 15 cm in diameter. The chip outlet is 360° adjustable by means of a lever and discharges the product from a height of 2.2 metres. The chipping disc comes with two separate blades. The CIPPO 15 can be drive from the vehicle’s power takeoff or by a petrol or diesel engine. A series of trailers is available for road transport, speed range 25- 80 km/h.
The Bio-Shredder and chipper Bio 600 combines both a hammer mill and disc blade chipper in one. The fineness of the finished product can be altered with the use of different size screens. A rubber belt conveyor can be fitted as an option to discharge the material even with a high moisture content. The lateral chipper is in a separate chamber from the hammer mill. This allows large logs to be fed through the chipper that cannot be fed directly through the mill. All high branches, leaves etc, can be put directly into the mill. The machines is capable of handling many organic materials including wood bark, scrob wood, greenery, flowers manure etc. The machine can be fitted with several options for use by contractors or public authorities ie road axle and towing hitch and sound insulation. The machine is of simple robust construction this allowing easy care and maintenance.
Accessoires:
- High speed chassis – 80 km/h
- Discharge conveyor mt 2,70
The Bio-Shredder and chipper Bio 400 combines both a hammer mill and disc blade chipper in one. The fineness of the finished product can be altered with the use of different size screens. A rubber belt conveyor can be fitted as an option to discharge the material even with a high moisture content. The lateral chipper is in a separate chamber from the hammer mill. This allows large logs to be fed through the chipper that cannot be fed directly through the mill. All high branches, leaves etc, can be put directly into the mill. The machines is capable of handling many organic materials including wood bark, scrob wood, greenery, flowers manure etc. The machine can be fitted with several options for use by contractors or public authorities ie road axle and towing hitch and sound insulation. The machine is of simple robust construction this allowing easy care and maintenance.
Accessoires:
- High speed chassis – 80 km/h
- Discharge conveyor mt 2,70
The shredder BIO 300 grinds vegetable refuse and assimilable materials such as green and dry prunings, soil, bark, wood packing, cardboard, etc. The BIO 300 model is a professional shredder which uses a movable hammer system. It can grind all types of green waste. Its grinding chamber is made of a movable, reversible 40 hammer mill. Hammers have a durability of 200/250 hours, according to the consistency of the materialground. The maximum diameter that can be ground is approx. 10 cm. The width of the rotormeasures 33 cm and so it may also be used for grinding fruit and vegetable boxes. Grinding is regulated by means of a grill. Material is fed into the machine with a hydraulic roller and automatically controlled acording to is bulk and shape on entry. Available versions: with tractor attachment. with 2 wheels for trasportation. Accessories: ground material load fan at 2 mt and 80 km/h highspeed chassis.
The Bio-Shredder type Bio 250 is suitable to petrol engine or PTO drive. The grinding system is composed by two part: the first one named stub-cutter is usud to cut wooden or fibrous products as wood, linden tree, willow, etc.; the second one, by means of moving little hammers, triturates products like leaves, hedges, mould, waste of kitchen; a good operation is garanted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a riddle by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The BIO 190 is a NEW GENERATION BIO-SHREDDER combining different systems used in shredding organic and vegetable waste, with a single feed opening, a double chipping and shredding system with grid refining and subsequent ventilation at 200 cm from the floor. The machine comes with engine or motor or tractor power takeoff. The BIO/Shredder type Bio 190 can be supplied with petrol or electric engine. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow etc; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a sieve by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The new generation BIO 230 Chipper Shredder is the ideal synthesis of the different organic and vegetable waste shredding systems. It features a single feeder chute and one feeder roller for feed-in operations, a double chipping and shredding system with screen-adjusted shredding size and subsequent ventilation via a 2 metre high blower discharge. Chipping is a process providing for the transformation of various sized and shaped wood slash into small, even CHIPS by way of cutting operations. Bio 230 has thus been specifically engineered for companies operating in the timber market sectors, for forest and park maintenance and for the production of wood chips used to feed central heating systems equipped with a feeding auger. The Bio 230 comes in either petrol or diesel motor versions, with tractor power takeoff, or in a 380V electric motor version. Wood chip and compost chip fineness is adjusted by way of a sieve, to required size. Natural transformation processes on the relative organic mulch result in a high-protein organic substance ideally implemented for fertilisers.
The Bio-Shredder and chipper Bio 200 combines both a hammer mill and disc blade chipper in one. The fineness of the finished product can be altered with the use of different size screens. The lateral chipper is a separate chamber from the hammer mill. This allows large logs to be fed throgh the chipper that cannot be fed directly through the mill. All high branches, leaves etc, can be put directly into the mill. The machine is capable of handling many organic materials including wood bark, scrob wood, greenery, flowers manure etc. The machine can be fitted with several options for use by contractors or pubblic authorities ie road axle and towing hitch and sound insulation. The machine is of simple robust construction this allowing easy care and maintenance.
Accessories:
- High speed chassis – 80 km/h
- 2 mt discharge fan
The new generation BIO 90 Chipper Shredder unit is the ideal synthesis of various different organic and vegetable waste shredding system solutions. It implements a single feeder chute for feed-in operations plus a double chipping and shredding system providing for screen-adjusted chipping size. The BIO 90 Chipper Shredder unit features either a petrol engine or an electric, three-phase motor. The grinding system is composed of two sections: the first, formed by two chipping blades, serves for chopping up wooden and fibre products such as wood, linden and willow slash, etc. the second, featuring 6 reversible mobile hammers, shreds products such as leaves, hedges, soil, kitchen waste, etc. Wood chip and compost chip fineness is adjusted to required size by way of a self-cleaning sieve. Chip discharge position too is ensured by way of an adjustable casing.
The BIO/Chippers model BIO 50 is fitted with petrol engine or 220 Volts electric motor. The shredding system consists of a blade for rough cutting material and of moving hammers for fine shredding. The shredding size of material and compost can be adjusted with a screen. The shredded organic material is transformed naturally into a substance rich in protein that can be reused as a fertilizer.
The Bio/Shredder type Bio 150 it can be supplied with petrol or electric engine. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow etc.; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a sieve by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
With its special mobile hammer shredding system, the Bio-shredder is ideal for chopping particularly wet or dry materials. The shredding device is protected against damage from any stones, nails, etc. that are picked up. The screen filters the shredded material to give an even compost which facilitates fermentation. With its sturdy framework and steel hammers, the Bio 80 is particularly suitable for heavy-duty operation and will run for a very long time without requiring any maintenance. The arrangement of the motor, rotor, hopper and wheels makes the machine very easy to handle. The Manufacturer provides an after-sale service for the machine and motor. The Bio 80 comes with all the latest safety systems.
The Bio/Shredder type Bio 60 can be supplied with a 220 or 380 Volts electric or engine petrol. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow, etc..; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a set of rods or a sieave. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The Cippo 25 is a machine designed for reducing the result of pruning to chip form maximum diameter 25 cm. It is fed by two selfc roller with indipendent motors that metres the flow of incoming material. The electronic “No-stress” device, guarantee the enige safeguard in case of overstress. The cip delivery nozzle can be adjuste through 360° by means of a lever and can launch material up to a heigh of 2.5 metres. the chipping drum is fissed with three adjustable moving blades and a fixed counter-blade.
• Maximum mobile roller opening: 25×25 cm
• Overturning hopper for road transport
• Trailer for road transport with tow to 25 and 80 Km/h
Composting is exothermic process of biological oxidation of organic substances by aerobic micro-organism, present in a sufficient quantity, on an organic biomass substrate rich in nutrients, that supplies oxygen and it keeps a constant PH factor and an appropriate nebulization. The working speed and the optimal aeration allowed by the turner are its main features.
Screening machine used on worksite, for composting, and in new emerging sectors for recovering and recycling wastes. Provided with a screening system with a rotary drum (screen change system for different requests), the loading system comes by means of a large worm screw which breaks up the material before it enters the drum; the thinner material drops onto the conveyor belts and discharged laterally; the rejects are instead removed by the rear belt.
Screening machine used on worksite, for composting, and in new emerging sectors for recovering and recycling wastes. Provided with a screening system with a rotary drum (screen change system for different requests), the loading system comes by means of a large worm screw which breaks up the material before it enters the drum; the thinner material drops onto the conveyor belts and discharged laterally; the rejects are instead removed by the rear belt.
Screening machine used on worksite, for composting, and in new emerging sectors for recovering and recycling wastes. Provided with a screening system with a rotary drum (screen change system for different requests), the loading system comes by means of a large worm screw which breaks up the material before it enters the drum; the thinner material drops onto the conveyor belts and discharged laterally; the rejects are instead removed by the rear belt.
Screening machine used on worksite, for composting, and in new emerging sectors for recovering and recycling wastes. Provided with a screening system with a rotary drum (screen change system for different requests), the loading system comes by means of a large worm screw which breaks up the material before it enters the drum; the thinner material drops onto the conveyor belts and discharged laterally; the rejects are instead removed by the rear belt.
The Bio- Shredder model Bio 900 represents the medium-high range of Caravaggi production. The machine is provided with a rotor of 22 mobile and reversible hammers, which last of 200-350 hours depends on the kind of material to shred. The conveyor belt is 130 mm wide and 2500 long with a shutter-type structure and high sides. The Bio 900 is available in diesel, electric engine and tractor power takeoff. The diesel engine is mounted under a bonnet, which is designed for continuous use with a “no-stress system” clutch. The Bio 900 has been created for shredding sawn-off branches, grass, leaves, trunks, wooden and cardboard packing cases as pallets, etc. The output production is about 30/60 m3/h depending on the type of material shredded. The material’s flowing is controlled by an electronic belt speed control device interconnected with the shredding rotor rotation speed.
The Bio-Shredder model Bio 930 represents the medium-high range of Caravaggi production. The machine is provided with a rotor of 22 mobile and reversible hammers, which last of 200-350 hours depends on the kind of material to shred. The conveyor belt is 130 mm wide and 2500 long with a shutter-type structure and high sides. The Bio 930 is available in diesel, electric engine and tractor power takeoff. The diesel engine is mounted under a bonnet, which is designed for continuous use with a “no-stress system” clutch. The Bio 930 has been created for shredding sawn-off branches, grass, leaves, trunks, wooden and cardboard packing cases as pallets, etc. The output production is about 30/60 m3/h depending on the type of material shredded. The material’s flowing is controlled by an electronic belt speed control device interconnected with the shredding rotor rotation speed.
The Bio 1250 Bio-Shredder is part of our medium-high quality range of products. The rotor comes with reversable moving hammers which last 150-200 hours, depending on the type of material to shred. The feel belt is 1250 mm wide and 3500 mm long with a shutter-type structure and high sides.
VERSION AVAILABLE:
• FOR TRACTOR: reccomended HP: 120/180
• WITH TURBO DIESEL ENGINE: installed HP: 235/302 HP
The silenced diesel engine is housed under a sound-proof bonnet designed for continuous use with a “NO STRESS” clutch. The Bio 1250 is deal for shredding SAWN-OFF BRANCHES, GRASS, LEAVES, WOODEN AND CARDBOARD PACKING CASES, WASTE FRUIT AND VEGETABLES, WOODEN BOXES, PALLETS, etc. Output ranges from 60 to 90 mc3/h depending on the type of material shredded. The control position is such that the operator has a constant view of the whole working area. The flow of material is controlled by an ELECTRONIC BELT SPEED CONTROL DEVICE synchronized with the SHREDDING ROTOR rotation speed.
This shredding system using mobile hammers is unique in that the size of the shredded materila can be adjustes using counter-hammers.
Il biotrituratore BIO 1900 è la macchina più imponente disponibile nel mercato avendo dimensioni progettate per accogliere i rifiuti organici e vegetali mediante caricamento da pale meccaniche e benne a polipo. Il sistema di caricamento è automatizzato e servo-assistito, le sicurezze attive e passive ne assicurano il funzionamento nella massima sicurezza con un solo operatore a bordo del caricatore. La macchina è dotata di rulli supplementari di preparazione del rifiuto, prefrantumatori, la triturazione con sfibratura è calibrata dalla griglia di post frantumazione a riciclo del materiale che non ha raggiunto la giusta pezzatura. L’innovativa catenaria, con regolazione della velocità e volume di carico, è dotata del sistema unico nel suo genere per la pulizia in continuo, il sistema garantisce che si possano triturare anche materiale fibroso e filamentoso. Lo scarico del materiale avviene mediante un nastro di scarico coperto totalmente, regolabile idraulicamente, predisposto per il montaggio del magnete per i metalli ferrosi. Il motore endotermico è alloggiato in un vano facilmente accessibile per la manutenzione, la copertura fonoassorbente ignifuga lo protegge e lo mantiene protetto e preservato da agenti esterni sia termici che meccanici durante le fasi di lavoro. La dotazione di serie prevede la frizione idraulica automatica centrifuga “Soft-starter” con controllo “Anti-shock” per proteggere gli apparati meccanici dall’intrusione costante di materiale non controllabile dall’operatore. Il trituratore è controllato con il sistema elettronico “No-stress” con PLC programmato per le varie esigenze operative. Ottimale per la riduzione volumetrica dei rifiuti da destinare al recupero come biomassa, imballaggi, etc. La disponibilità di vari modelli di carrello stradale, lo rende agibile ed utilizzabile in ogni cantiere di lavoro.
Il cippatore CIPPO 1900 ha caratteristiche dimensionali adatte a ricevere ogni tipo di legno da trasformare in cippato. Il tamburo e’ l’unico ad adottare lame sezionate, facilmente regolabili e affilabili. L’unicità della grande tramoggia di carico con nastro di autoalimentazione permette che il legno venga gettato senza alcuna necessità di particolare adattamento ai rulli alimentatori. La griglia in dotazione, con foro a scelta, calibra il cippato. Tutto il materiale trattato viene recuperato tramite coclea a vite senza fine, garantendo la perfetta pulizia. Il nastro di scarico coperto regolabile, e’ predisposto per il magnete ed è studiato per non sfarinare il cippato evitando che parte del legno venga perso durante la combustione. La dotazione di serie prevede il telecomando, l’insonorizzazione del motore endotermico, oltre la gestione elettronica No-stress le sicurezze passive Anti-stress e Anti-shok, il carrello da cantiere, predisposizone del ponte cingolato per la movimentazione in aree accidentate. L’innovativo sistema “multirullo” alimentatore e dosatore con denti a ritegno, stabilizza il legno in ingresso in modo orizzontale assicurando la perfetta qualità del materiale.
Il trituratore industriale modello TRITO 1900 è progettato per i grandi lavori di riduzione volumetrica di ogni tipo di rifiuto. La rivoluzionaria soluzione ad utensili flottanti intercambiabili con sistema a denti e contropettine auto pulente, rende il trituratore un riduttore volumetrico di ineguagliabili caratteristiche funzionali ed assicura la costante operatività “NON FERMANDOSI MAI”, neppure processando il rifiuto “fibroso e filamentoso” tanto temuto dalla concorrenza. La macchina è dotata di serie di ogni accessorio che la rende sicura: sicurezze attive e passive, telecomando, metal detector, oltre la disponibilità a personalizzare la versione alle varie esigenze impiantistiche per l’alloggiamento fisso con telecamera. I rulli prerompitori aprì sacco dosano e facilitano il processo di trattamento, la pezzatura e’ regolabile. L’assistenza ordinaria, l’accesso agli organi meccanici di trasmissione e alle parti di usura, sono semplici e sicuri. La dotazione di serie ed il corso di formazione per gli operatori sono la garanzia per il continuo e perfetto funzionamento.
To meet the needs of small and large farms alike, while ensuring high performance with all types of material handled, ranging from fresh or dry cereals to corn-cobs, hay and straw.
The Bio 1250 Bio-Shredder is part of our medium-high quality range of products. The rotor comes with reversable moving hammers which last 150-200 hours, depending on the type of material to shred. The feel belt is 1250 mm wide and 3500 mm long with a shutter-type structure and high sides.
VERSION AVAILABLE:
• FOR TRACTOR: reccomended HP: 120/180
• WITH TURBO DIESEL ENGINE: installed HP: 235/302 HP
The silenced diesel engine is housed under a sound-proof bonnet designed for continuous use with a “NO STRESS” clutch. The Bio 1250 is deal for shredding SAWN-OFF BRANCHES, GRASS, LEAVES, WOODEN AND CARDBOARD PACKING CASES, WASTE FRUIT AND VEGETABLES, WOODEN BOXES, PALLETS, etc. Output ranges from 60 to 90 mc3/h depending on the type of material shredded. The control position is such that the operator has a constant view of the whole working area. The flow of material is controlled by an ELECTRONIC BELT SPEED CONTROL DEVICE synchronized with the SHREDDING ROTOR rotation speed.
This shredding system using mobile hammers is unique in that the size of the shredded materila can be adjustes using counter-hammers.
Il biotrituratore BIO 1900 è la macchina più imponente disponibile nel mercato avendo dimensioni progettate per accogliere i rifiuti organici e vegetali mediante caricamento da pale meccaniche e benne a polipo. Il sistema di caricamento è automatizzato e servo-assistito, le sicurezze attive e passive ne assicurano il funzionamento nella massima sicurezza con un solo operatore a bordo del caricatore. La macchina è dotata di rulli supplementari di preparazione del rifiuto, prefrantumatori, la triturazione con sfibratura è calibrata dalla griglia di post frantumazione a riciclo del materiale che non ha raggiunto la giusta pezzatura. L’innovativa catenaria, con regolazione della velocità e volume di carico, è dotata del sistema unico nel suo genere per la pulizia in continuo, il sistema garantisce che si possano triturare anche materiale fibroso e filamentoso. Lo scarico del materiale avviene mediante un nastro di scarico coperto totalmente, regolabile idraulicamente, predisposto per il montaggio del magnete per i metalli ferrosi. Il motore endotermico è alloggiato in un vano facilmente accessibile per la manutenzione, la copertura fonoassorbente ignifuga lo protegge e lo mantiene protetto e preservato da agenti esterni sia termici che meccanici durante le fasi di lavoro. La dotazione di serie prevede la frizione idraulica automatica centrifuga “Soft-starter” con controllo “Anti-shock” per proteggere gli apparati meccanici dall’intrusione costante di materiale non controllabile dall’operatore. Il trituratore è controllato con il sistema elettronico “No-stress” con PLC programmato per le varie esigenze operative. Ottimale per la riduzione volumetrica dei rifiuti da destinare al recupero come biomassa, imballaggi, etc. La disponibilità di vari modelli di carrello stradale, lo rende agibile ed utilizzabile in ogni cantiere di lavoro.
Il cippatore CIPPO 1900 ha caratteristiche dimensionali adatte a ricevere ogni tipo di legno da trasformare in cippato. Il tamburo e’ l’unico ad adottare lame sezionate, facilmente regolabili e affilabili. L’unicità della grande tramoggia di carico con nastro di autoalimentazione permette che il legno venga gettato senza alcuna necessità di particolare adattamento ai rulli alimentatori. La griglia in dotazione, con foro a scelta, calibra il cippato. Tutto il materiale trattato viene recuperato tramite coclea a vite senza fine, garantendo la perfetta pulizia. Il nastro di scarico coperto regolabile, e’ predisposto per il magnete ed è studiato per non sfarinare il cippato evitando che parte del legno venga perso durante la combustione. La dotazione di serie prevede il telecomando, l’insonorizzazione del motore endotermico, oltre la gestione elettronica No-stress le sicurezze passive Anti-stress e Anti-shok, il carrello da cantiere, predisposizone del ponte cingolato per la movimentazione in aree accidentate. L’innovativo sistema “multirullo” alimentatore e dosatore con denti a ritegno, stabilizza il legno in ingresso in modo orizzontale assicurando la perfetta qualità del materiale.
Il trituratore industriale modello TRITO 1900 è progettato per i grandi lavori di riduzione volumetrica di ogni tipo di rifiuto. La rivoluzionaria soluzione ad utensili flottanti intercambiabili con sistema a denti e contropettine auto pulente, rende il trituratore un riduttore volumetrico di ineguagliabili caratteristiche funzionali ed assicura la costante operatività “NON FERMANDOSI MAI”, neppure processando il rifiuto “fibroso e filamentoso” tanto temuto dalla concorrenza. La macchina è dotata di serie di ogni accessorio che la rende sicura: sicurezze attive e passive, telecomando, metal detector, oltre la disponibilità a personalizzare la versione alle varie esigenze impiantistiche per l’alloggiamento fisso con telecamera. I rulli prerompitori aprì sacco dosano e facilitano il processo di trattamento, la pezzatura e’ regolabile. L’assistenza ordinaria, l’accesso agli organi meccanici di trasmissione e alle parti di usura, sono semplici e sicuri. La dotazione di serie ed il corso di formazione per gli operatori sono la garanzia per il continuo e perfetto funzionamento.
The BIO/Chippers model BIO 50 is fitted with petrol engine or 220 Volts electric motor. The shredding system consists of a blade for rough cutting material and of moving hammers for fine shredding. The shredding size of material and compost can be adjusted with a screen. The shredded organic material is transformed naturally into a substance rich in protein that can be reused as a fertilizer.
The bioshredder model BIO 55 is equipped with petrol and electric engine. The shredding system consists of a blade for rough cutting material and of moving hammers for fine shredding. The new system with belt transmission grants safety in case unsuitable materials as stones are introduced. The final output, which can also be adjusted thanks to a mobile screen, is released into a gathering sack placed at the discharge opening. The shredded organic material is transformed naturally into a substance rich in protein that can be reused as a fertilizer.
The Bio/Shredder type Bio 60 can be supplied with a 220 or 380 Volts electric or engine petrol. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow, etc..; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a set of rods or a sieave. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
With its special mobile hammer shredding system, the Bio-shredder is ideal for chopping particularly wet or dry materials. The shredding device is protected against damage from any stones, nails, etc. that are picked up. The screen filters the shredded material to give an even compost which facilitates fermentation. With its sturdy framework and steel hammers, the Bio 80 is particularly suitable for heavy-duty operation and will run for a very long time without requiring any maintenance. The arrangement of the motor, rotor, hopper and wheels makes the machine very easy to handle. The Manufacturer provides an after-sale service for the machine and motor. The Bio 80 comes with all the latest safety systems.
The new generation BIO 90 Chipper Shredder unit is the ideal synthesis of various different organic and vegetable waste shredding system solutions. It implements a single feeder chute for feed-in operations plus a double chipping and shredding system providing for screen-adjusted chipping size. The BIO 90 Chipper Shredder unit features either a petrol engine or an electric, three-phase motor. The grinding system is composed of two sections: the first, formed by two chipping blades, serves for chopping up wooden and fibre products such as wood, linden and willow slash, etc. the second, featuring 6 reversible mobile hammers, shreds products such as leaves, hedges, soil, kitchen waste, etc. Wood chip and compost chip fineness is adjusted to required size by way of a self-cleaning sieve. Chip discharge position too is ensured by way of an adjustable casing.
The Bio/Shredder type Bio 100 it can be supplied with petrol or electric engine. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow etc.; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a sieve by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The Bio/Shredder type Bio 150 it can be supplied with petrol or electric engine. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow etc.; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a sieve by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The Scarifier is a machine studied for the maintenance of lawns, clearing them of everything that may prevent the regular oxygenation and filtering of water and fertilizer in the subsoil such as small roots and moss, therefore the growth of the lawn is guaranteed. The scarifier system is composed of a central rotor that can be equipped with fixed, mobile or spring blades. The possibility to adjust the depth of the scarifier system, by using the appropriate adjusting lever, guarantees usage of the achine
in every possible condition thus obtaining first-class results. The scarifier ARIO is available in the following versions: 40 / 50 / 60 / 120, constituting a wide range suitable for all requirements needed, fitted with a petrol engine.
The Chipper Mixer is a machine used for crushing and mixing of different products, for use in the field of composting and volume reduction. The process provides for the shredding of the material and the simultaneous mixing of the same, thus allowing to obtain a homogeneous product. The slow rotation of the blades, it also allows a reduction of the noise, dust and eliminates the projection of machining chips.
The BIO 190 is a NEW GENERATION BIO-SHREDDER combining different systems used in shredding organic and vegetable waste, with a single feed opening, a double chipping and shredding system with grid refining and subsequent ventilation at 200 cm from the floor. The machine comes with engine or motor or tractor power takeoff. The BIO/Shredder type Bio 190 can be supplied with petrol or electric engine. The grinding system is composed by two parts: the first one named chipper is used to cut wooden or fibrous products as wood, linden tree, willow etc; the second one, by means of little hammers, triturates products like leaves, hedges, mould, waste of kitchen: a good operation is granted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a sieve by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The Bio-Shredder and chipper Bio 200 combines both a hammer mill and disc blade chipper in one. The fineness of the finished product can be altered with the use of different size screens. The lateral chipper is a separate chamber from the hammer mill. This allows large logs to be fed throgh the chipper that cannot be fed directly through the mill. All high branches, leaves etc, can be put directly into the mill. The machine is capable of handling many organic materials including wood bark, scrob wood, greenery, flowers manure etc. The machine can be fitted with several options for use by contractors or pubblic authorities ie road axle and towing hitch and sound insulation. The machine is of simple robust construction this allowing easy care and maintenance.
Accessories:
- High speed chassis – 80 km/h
- 2 mt discharge fan
The new generation BIO 230 Chipper Shredder is the ideal synthesis of the different organic and vegetable waste shredding systems. It features a single feeder chute and one feeder roller for feed-in operations, a double chipping and shredding system with screen-adjusted shredding size and subsequent ventilation via a 2 metre high blower discharge. Chipping is a process providing for the transformation of various sized and shaped wood slash into small, even CHIPS by way of cutting operations. Bio 230 has thus been specifically engineered for companies operating in the timber market sectors, for forest and park maintenance and for the production of wood chips used to feed central heating systems equipped with a feeding auger. The Bio 230 comes in either petrol or diesel motor versions, with tractor power takeoff, or in a 380V electric motor version. Wood chip and compost chip fineness is adjusted by way of a sieve, to required size. Natural transformation processes on the relative organic mulch result in a high-protein organic substance ideally implemented for fertilisers.
The BIO 235 is the new chipper/shredder from Caravaggi production, offering new performances. It is provided with new following features: Cutting capacity : 13 cm; Bigger and overturning hopper; Hydraulic feeding roller with two blades; Stronger rotor. It is the ideal synthesis of the different organic and vegetable waste shredding system. It is provided with a single feeder chute and one feeding roller for feed-in operations, a double chipping and shredding system with screen adjusted shredding
size and subsequent discharge through a 2 metres high blower. Chipping is a cutting process for wood up to 13 cm diameter for the transformation of various size and shaped wood into small, slash chips. It is specifically engineered for companies operating in the timber market sectors, for forests and park maintenance and for the production of wood chips used to feed central heating system. Bio 235 is available in petrol engine, diesel and tractor power takeoff. Natural transformation process on the relative organic mulch result in a high-protein substance ideally implemented for fertilisers.
The Bio-Shredder type Bio 250 is suitable to petrol engine or PTO drive. The grinding system is composed by two part: the first one named stub-cutter is usud to cut wooden or fibrous products as wood, linden tree, willow, etc.; the second one, by means of moving little hammers, triturates products like leaves, hedges, mould, waste of kitchen; a good operation is garanted even if pebbles or nails have been introduced accidentally. The fineness of the ground material can be adjusted through a riddle by request. The natural transformation of the biologic triturated material originates a substance having a high proteinic value which is used as manure.
The shredder BIO 300 grinds vegetable refuse and assimilable materials such as green and dry prunings, soil, bark, wood packing, cardboard, etc. The BIO 300 model is a professional shredder which uses a movable hammer system. It can grind all types of green waste. Its grinding chamber is made of a movable, reversible 40 hammer mill. Hammers have a durability of 200/250 hours, according to the consistency of the materialground. The maximum diameter that can be ground is approx. 15 cm. The width of the rotormeasures 33 cm and so it may also be used for grinding fruit and vegetable boxes. Grinding is regulated by means of a grill. Material is fed into the machine with a hydraulic roller and automatically controlled acording to is bulk and shape on entry. Available versions: with tractor attachment. with 2 wheels for trasportation. Accessories: ground material load fan at 2 mt and 80 km/h highspeed chassis.
The Bio-Shredder and chipper Bio 400 combines both a hammer mill and disc blade chipper in one. The fineness of the finished product can be altered with the use of different size screens. A rubber belt conveyor can be fitted as an option to discharge the material even with a high moisture content. The lateral chipper is in a separate chamber from the hammer mill. This allows large logs to be fed through the chipper that cannot be fed directly through the mill. All high branches, leaves etc, can be put directly into the mill. The machines is capable of handling many organic materials including wood bark, scrob wood, greenery, flowers manure etc. The machine can be fitted with several options for use by contractors or public authorities ie road axle and towing hitch and sound insulation. The machine is of simple robust construction this allowing easy care and maintenance.
Accessoires:
- High speed chassis – 80 km/h
- Discharge conveyor mt 2,70
The Bio-Shredder and chipper Bio 600 combines both a hammer mill and disc blade chipper in one. The fineness of the finished product can be altered with the use of different size screens. A rubber belt conveyor can be fitted as an option to discharge the material even with a high moisture content. The lateral chipper is in a separate chamber from the hammer mill. This allows large logs to be fed through the chipper that cannot be fed directly through the mill. All high branches, leaves etc, can be put directly into the mill. The machines is capable of handling many organic materials including wood bark, scrob wood, greenery, flowers manure etc. The machine can be fitted with several options for use by contractors or public authorities ie road axle and towing hitch and sound insulation. The machine is of simple robust construction this allowing easy care and maintenance.
Accessoires:
- High speed chassis – 80 km/h
- Discharge conveyor mt 2,70
The Bio-Shredder and chipper Bio 800 is a machine special and built on request and meet the specifications of the customer.
The Bio-Shredder combines both a hammer mill and disc blade chipper in one.
The machines is capable of handling many organic materials including wood bark, scrub wood, greenery, flowers manure etc.
The Cippo 10 is equipped with a hydraulic feed roller that can break trunks and branches up to 12 cm diameter into chip form. The chipping drum is fitted with two blades and a counter-blade. The chip delivery nozzle can launch material up to a height of 220 cm from the ground and rotates through 360°.
The CIPPO 15 chipping machine is designed for use by forestry, tree felling,and garden maintenance companies and the producers of chips for heating system. The extra large feed hopper is comprised of a two-hydraulic roller feed system with independent motors that regulate the flow of material, which can be up to 15 cm in diameter. The chip outlet is 360° adjustable by means of a lever and discharges the product from a height of 2.2 metres. The chipping disc comes with two separate blades. The CIPPO 15 can be drive from the vehicle’s power takeoff or by a petrol or diesel engine. A series of trailers is available for road transport, speed range 25- 80 km/h.
The Cippo 25 is a machine designed for reducing the result of pruning to chip form maximum diameter 25 cm. It is fed by two selfc roller with indipendent motors that metres the flow of incoming material. The electronic “No-stress” device, guarantee the enige safeguard in case of overstress. The cip delivery nozzle can be adjuste through 360° by means of a lever and can launch material up to a heigh of 2.5 metres. the chipping drum is fissed with three adjustable moving blades and a fixed counter-blade.
• Maximum mobile roller opening: 25×25 cm
• Overturning hopper for road transport
• Trailer for road transport with tow to 25 and 80 Km/h
- Honda engine from 9 to 13 HP
- Kohler engine from 12 HP
- Light machine and easy to use (weight ~ 150 Kg)
- Cutter wheel with 8 carbide tools, easy to replace
- Control handle bar adjustable
- Machine ideal for professional use
- Kohler engine from 20 to 25 HP
- Hydrostatic transmission for move and control easy
- Electric clutch
- Light machine and easy to use (weight 227÷236 Kg)
- Cutter wheel with 8 carbide tools, easy to replace
- Control handle bar adjustable
- Special air filter for hard use of the machine
- Machine ideal for professional use
- Kohler engine 27 or B&S Vanguard 31 HP
- Solid machine and practice to use
- Hydrostatic transmission for move and control easy
- Front wheels adjustables in width up to 120 cm
- Width in transport to 75 cm
- Telescopic cutter wheel adjustable in length up to 60 cm
- Cutter tools “Heavy Duty” easy to replace
- Start panel with safety switch
- Central position of controls lever
- Stabilization hydraulic plate
- Weight from 680 to 690 Kg
- Macchine made with advanced technology for professional use
The TRITO is a multi-purpose shredder ideal for recycling garbage disposal of any type such as paper, cardboard even of thickness, plastic bottles and boxes, fiberglass bumpers, carpentry scraps, pharmaceutical and hospital wastes. Thanks to the wide range and to the different types of blades it is able to satisfy the several and various requirements. The production of the chipped material varies according to the type of the pieces to be shredded and the size to be obtained. It is equipped with a safety system consisting in a rotation and reverse application in case of overloading. A versatile machine, ideal for different kinds of wastes, the TRITO is at low energy consumption and at low noise; so particularly fitted to small and medium companies.
The Chipper Mixer is a machine used for crushing and mixing of different products, for use in the field of composting and volume reduction. The process provides for the shredding of the material and the simultaneous mixing of the same, thus allowing to obtain a homogeneous product. The slow rotation of the blades, it also allows a reduction of the noise, dust and eliminates the projection of machining chips.
Utilizzando il sito, accetti l'utilizzo dei cookie da parte nostra. (EN) By continuing to use the site, you agree to the use of cookies. (FR) En utilisant le site, vous acceptez l'utilisation de cookies de notre part. maggiori informazioni - more information - plus d'informations
Cookies
Per far funzionare bene questo sito, a volte installiamo sul tuo dispositivo dei piccoli file di dati che si chiamano "cookies". Anche la maggior parte dei grandi siti fanno lo stesso.
Cosa sono i cookies?
Un cookie è un piccolo file di testo che i siti salvano sul tuo computer o dispositivo mobile mentre li visiti. Grazie ai cookies il sito ricorda le tue azioni e preferenze (per es. login, lingua, dimensioni dei caratteri e altre impostazioni di visualizzazione) in modo che tu non debba reinserirle quando torni sul sito o navighi da una pagina all'altra.
Come controllare i cookies?
Puoi controllare e/o verificare i cookies come vuoi – per saperne di più, vai su aboutcookies.org. Puoi cancellare i cookies già presenti nel computer e impostare quasi tutti i browser in modo da bloccarne l'installazione. Se scegli questa opzione, dovrai però modificare manualmente alcune preferenze ogni volta che visiti il sito ed è possibile che alcuni servizi o determinate funzioni non siano disponibili.
<<<--->>>
Cookies
To make this site work properly, we sometimes place small data files called cookies on your device. Most big websites do this too.
What are cookies?
A cookie is a small text file that a website saves on your computer or mobile device when you visit the site. It enables the website to remember your actions and preferences (such as login, language, font size and other display preferences) over a period of time, so you don’t have to keep re-entering them whenever you come back to the site or browse from one page to another.
How to control cookies
You can control and/or delete cookies as you wish – for details, see aboutcookies.org. You can delete all cookies that are already on your computer and you can set most browsers to prevent them from being placed. If you do this, however, you may have to manually adjust some preferences every time you visit a site and some services and functionalities may not work.
<<<--->>>
Cookies
Pour assurer le bon fonctionnement de ce site, nous devons parfois enregistrer de petits fichiers de données sur l'équipement de nos utilisateurs. La plupart des grands sites web font de même.
Qu'est-ce qu'un cookie?
Un cookie est un petit fichier texte que les sites web sauvegardent sur votre ordinateur ou appareil mobile lorsque vous les consultez. Il permet à ces sites de mémoriser vos actions et préférences (nom d'utilisateur, langue, taille des caractères et autres paramètres d'affichage) pendant un temps donné, pour que vous n'ayez pas à réindiquer ces informations à chaque fois vous consultez ces sites ou naviguez d'une page à une autre.
Comment contrôler les cookies
Vous pouvez contrôler et/ou supprimer des cookies comme vous le souhaitez. Pour en savoir plus, consultez aboutcookies.org. Vous avez la possibilité de supprimer tous les cookies déjà stockés sur votre ordinateur et de configurer la plupart des navigateurs pour qu'ils les bloquent. Toutefois, dans ce cas, vous devrez peut-être indiquer vous-mêmes certaines préférences chaque fois que vous vous rendrez sur un site, et certains services et fonctionnalités risquent de ne pas être accessibles.